Download X Air Behringer and Unlock the Full Potential of Your Digital Mixer
Download X Air Behringer: How to Control Your Digital Mixer from Your Tablet or Smartphone
If you are looking for a way to mix your live sound with ease and flexibility, you might want to consider the X Air Behringer series of digital mixers. These mixers are designed to be controlled wirelessly from your tablet or smartphone, using the free X Air app. In this article, we will show you what X Air Behringer is, how to download and install the app, how to connect it to your mixer, and how to use it to control all the mixing, processing, and effects functions of your mixer.
What is X Air Behringer?
X Air Behringer is a series of digital mixers that can be controlled remotely from your tablet or smartphone, using the X Air app. The app allows you to access all the features and functions of your mixer, such as input levels, EQ, dynamics, effects, routing, and more. You can also save and recall snapshots of your settings, and use the built-in RTA (Real Time Analyzer) to fine-tune your sound.
download x air behringer
Features and benefits of X Air Behringer
Some of the features and benefits of X Air Behringer are:
Wireless control: You can control your mixer from anywhere in the room, or even on stage, using your tablet or smartphone. This gives you more freedom and flexibility to adjust your sound according to the venue and audience.
Programmable Midas preamps: The mixers feature high-quality Midas preamps that can be adjusted remotely from the app. You can change the gain, low cut, phase, phantom power, and stereo link settings for each input channel.
Integrated Wi-Fi module: The mixers have a built-in Wi-Fi module that creates a wireless network for your devices. You don't need any additional hardware or cables to connect your tablet or smartphone to your mixer.
USB audio interface: The mixers also function as multi-channel USB audio interfaces that can record and playback audio from your computer. You can use them for live recording, studio production, or podcasting.
Effects processors: The mixers have four internal stereo effects processors that feature the same audio engine as the acclaimed Behringer X32 digital mixer. You can choose from over 50 studio-quality effects, such as reverb, delay, chorus, flanger, phaser, and more.
X Air Series models and specifications
The X Air Series consists of four models: XR18, XR16, XR12, and X18. Here are their main specifications:
Model
Input channels
Output buses
Midas preamps
USB interface
Rackmountable
XR18
18
12
16
18x18
Yes
XR16
16
8
8
16x16
Yes
XR12
12
6
4
go to the Wi-Fi settings and connect to the same network that your router is using.
Once you are connected, open the X Air app on your device.
The app will automatically scan for available mixers and show them on the screen.
Select your mixer from the list and tap on "Connect".
You should see a confirmation message that says "Connected to Mixer".
How to use X Air Behringer app to control your mixer
Once you have connected your tablet or smartphone to your mixer, you can use the X Air app to control all the aspects of your mix. The app has a user-friendly interface that mimics the layout of a physical mixer, with faders, knobs, buttons, and meters. You can swipe, tap, drag, and pinch to adjust the settings and parameters of your mixer. Here are some of the main functions that you can perform with the app:
download x air behringer app for android
download x air behringer software for windows
download x air behringer xr18 manual
download x air behringer xr12 firmware
download x air behringer xr16 drivers
download x air behringer x18 editor
download x air behringer app for ipad
download x air behringer software for mac
download x air behringer xr18 firmware update
download x air behringer xr12 manual pdf
download x air behringer xr16 software update
download x air behringer x18 manual pdf
download x air behringer app for pc
download x air behringer software for linux
download x air behringer xr18 drivers for windows 10
download x air behringer xr12 software for mac
download x air behringer xr16 manual pdf
download x air behringer x18 firmware update
download x air behringer app for iphone
download x air behringer software for chromebook
download x air behringer xr18 software for mac
download x air behringer xr12 drivers for windows 10
download x air behringer xr16 firmware update
download x air behringer x18 drivers for windows 10
download x air behringer app for android tablet
download x air behringer software for windows 10
download x air behringer xr18 manual pdf
download x air behringer xr12 software update
download x air behringer xr16 software for mac
download x air behringer x18 software for mac
download x air behringer app for macbook pro
download x air behringer software for windows 7
download x air behringer xr18 software update
download x air behringer xr12 firmware update
download x air behringer xr16 drivers for windows 10
download x air behringer x18 software update
download x air behringer app for windows 10 laptop
download x air behringer software for windows 8.1
download x air behringer xr18 firmware upgrade
download x air behringer xr12 drivers for mac
download x air behringer xr16 firmware upgrade
download x air behringer x18 firmware upgrade
download x air behringer app for chromebook laptop
download x air behringer software for windows xp
download x air behringer xr18 drivers for mac
download x air behringer xr12 software for linux
download x air behringer xr16 software for linux
download x air behringer x18 software for linux
download x air behringer app for ipad pro 11 inch
Overview of the user interface
The user interface of the X Air app consists of four main sections: the toolbar, the channel strip, the main screen, and the navigation bar.
The toolbar is located at the top of the screen and contains buttons for accessing various functions and menus, such as settings, snapshots, RTA, meters, and more.
The channel strip is located on the left side of the screen and shows the input and output channels of your mixer. You can scroll up and down to see all the channels. You can also select a channel by tapping on it, which will bring up its detailed settings on the main screen.
The main screen is located in the center of the screen and shows the settings and parameters of the selected channel or function. You can swipe left and right to switch between different tabs, such as preamp, EQ, dynamics, effects, routing, etc.
The navigation bar is located at the bottom of the screen and contains buttons for switching between different views and modes, such as home, mixers, sends, FX returns, etc.
Adjusting input levels and preamp settings
To adjust the input levels and preamp settings of your mixer, you need to follow these steps:
Select an input channel by tapping on it on the channel strip.
On the main screen, swipe left or right until you see the preamp tab.
Use the fader to adjust the input level of the channel. You can also use the meter to monitor the signal level.
Use the knobs to adjust the gain, low cut, phase, phantom power, and stereo link settings of the channel. You can also use the buttons to turn them on or off.
If you want to copy or paste the settings of a channel to another channel, you can use the copy and paste buttons on the toolbar.
Applying EQ, dynamics, and effects
To apply EQ, dynamics, and effects to your mixer, you need to follow these steps:
Select an input or output channel by tapping on it on the channel strip.
On the main screen, swipe left or right until you see the EQ, dynamics, or effects tab.
Use the knobs, buttons, and sliders to adjust the settings and parameters of the EQ, dynamics, or effects processor. You can also use the graphical display to see the frequency response, gain reduction, or effect chain.
If you want to bypass or enable the EQ, dynamics, or effects processor, you can use the bypass or enable button on the top right corner of the tab.
If you want to choose a different type of EQ, dynamics, or effects processor, you can use the type button on the top left corner of the tab. You can choose from various models and presets that are available for each processor.
If you want to apply an effect to a channel or bus, you need to first assign it to one of the four internal effects processors. You can do this by tapping on the FX send button on the channel strip, and then selecting one of the four FX slots. You can also adjust the send level and pan of the channel or bus to the effect processor.
If you want to adjust the output level and pan of the effect processor, you can do this by tapping on the FX return button on the navigation bar, and then selecting one of the four FX slots. You can also adjust the master level and pan of all the effect processors using the FX master button on the navigation bar.
Mixing and routing channels and buses
To mix and route channels and buses on your mixer, you need to follow these steps:
Select an input or output channel by tapping on it on the channel strip.
On the main screen, swipe left or right until you see the mixers or sends tab.
Use the faders to adjust the level of each channel or bus. You can also use the meters to monitor the signal level.
Use the knobs to adjust the pan and mute settings of each channel or bus. You can also use the buttons to turn them on or off.
If you want to route a channel or bus to a different output, you can do this by tapping on the routing button on the toolbar, and then selecting the output that you want to route to. You can choose from various outputs, such as main LR, aux, monitor, headphone, etc.
If you want to link two channels or buses together, you can do this by tapping on the link button on the toolbar, and then selecting the channels or buses that you want to link. You can link up to four channels or buses together, and control them as one.
Saving and recalling snapshots
To save and recall snapshots of your mixer settings, you need to follow these steps:
Tap on the snapshot button on the toolbar to open the snapshot menu.
To save a snapshot, tap on the save button, and then enter a name for your snapshot. You can also add a comment and a picture to your snapshot.
To recall a snapshot, tap on the snapshot that you want to recall from the list of snapshots. You can also use the arrows to scroll through the snapshots.
To delete a snapshot, tap on the edit button, and then tap on the delete button next to the snapshot that you want to delete.
Conclusion and FAQs
In this article, we have shown you how to download X Air Behringer app and use it to control your digital mixer from your tablet or smartphone. We hope that this article has been helpful and informative for you. If you have any questions or feedback, please feel free to contact us. Here are some FAQs that you might find useful:
Q: What are the system requirements for X Air Behringer app?
A: The X Air Behringer app requires Android 4.0 or higher, or iOS 8.0 or higher. It also requires a Wi-Fi connection and a compatible X Air mixer.
Q: How can I update the firmware of my mixer?
A: To update the firmware of your mixer, you need to connect your mixer to your computer using a USB cable, and then download and install the latest firmware from the Behringer website. You can also check for firmware updates from the X Air app by tapping on the settings button and then tapping on "Check for Updates".
Q: How can I reset my mixer to factory settings?
A: To reset your mixer to factory settings, you need to turn off your mixer, and then press and hold the reset button on the back of your mixer for about 10 seconds. You will see a red LED flashing on your mixer, indicating that it has been reset.
Q: How can I troubleshoot my Wi-Fi connection issues?
A: If you have trouble connecting your tablet or smartphone to your mixer via Wi-Fi, you can try these steps:
Make sure that your tablet or smartphone is connected to the same Wi-Fi network as your mixer.
Make sure that your Wi-Fi signal is strong and stable.
Make sure that your Wi-Fi network is not congested or interfered by other devices or networks.
Make sure that your Wi-Fi network is not secured by a firewall or proxy that might block the communication between your tablet or smartphone and your mixer.
Make sure that your mixer and your tablet or smartphone have the latest firmware and software updates.
Restart your mixer and your tablet or smartphone.
Q: How can I contact Behringer for support?
A: If you need further assistance or support from Behringer, you can contact them through their website, phone number, email address, or social media channels. Here are their contact details:
Website: https://www.behringer.com/
Phone number: +49 2154 9206 4149
Email address: care@musictribe.com
Social media: Facebook, Twitter, YouTube, Instagram